Special 4-cylindrical-column motorized hydraulic press to carry out high-performance vulcanizing works MV-1000 E model Special 4-cylindrical-column motorized hydraulic press to carry out high-performance vulcanizing works MV-1000 E model

The HIDROGARNE hydraulic press MV-1000 E model is designed with four cylindrical chrome columns of diameter 250mm, and specially manufactured to carry out high-performance vulcanizing works.

As all our M series hydraulic press, it works with hydraulic pressure lower than 290 bar to ensure the greater durability of the hydraulic system as a whole.

Structure and tables

  • Structure of four cylindrical chrome columns of diameter 250mm, made exclusively of C45E steel.
  • Central table with “T” grooves, guided by the 4 columns and bronze-graphite bushings.
  • Bottom table with “T” grooves and front hydraulic extraction with capacity to move loads until 25 TN.
  • The useful dimensions of the tables are 1500x1500mm.
  • The tables have incorporated two heated plates that can reach 250ºC of temperature
    • they are controlled by a thermal system TL 42-1/4 that allows to make a register of pressure, temperature, visualization and storage of data.
    • The precision of the thermal plates is +-5%.
    • They include a cooling circuit.
  • It incorporates a NC SIEMENS S-7/1200 KP-400, to regulate the travel of the table, the working pressure, the hydraulic peripherals, programming the time of pressing and changes of speed.

Cylinders and hydraulic unit

  • 4 main cylinders of 250 TN each one.
  • Two lateral cylinders for a fast approaching and return of the central table.
  • Hydraulic unit is two-speed motorized with fast speed automatic shut-off.
    • REXROHT pressure and manoeuvre valves.
    • DENISON-PARKER double Vane Pump for high and low pressure.
    • It incorporates hydraulic connections for auxiliary peripherals and air-oil cooling system.
  • The hydraulic group is located at the top of the press and to facilitate its access it has been installed a passable walkway.

Electric installation and safety

  • The control panel incorporates a selector that allows to choose the type of work that we want to perform in manual or automatic cycle.
  • It also incorporates a selector to select the operation in speed of fast approaching, slow speed of working and adjustment of the tools.
  • The electrical and electronic equipment are of the brands SCHNEIDER, SIEMENS and LG.

Technical features

  • Power: 1000 Tn
  • Speed: 2
  • Motor power: 30 Kw
  • Maximum working pressure: 300 bar
  • Approaching speed: 90 mm/s
  • Working speed: 3 mm/s
  • Return speed: 110mm/s
  • Piston stroke: 1.500 mm
  • Frontal light: 1.750 mm
  • Lateral light: 800 mm
  • Vertical light: 2.500 mm
  • Useful dimensions of the tables: 1.500 x 1.500 mm
  • Diameter of the guides: 250 mm
  • Weight: 60.000 Kg

More special hydraulic presses