{"id":26108,"date":"2014-11-20T10:02:18","date_gmt":"2014-11-20T09:02:18","guid":{"rendered":"https:\/\/www.hidrogarne.com\/non-classifiee\/new-series-of-hydraulic-presses-hidrogarne-for-high-production-in-stamping-die-cutting-and-deep-drawing\/"},"modified":"2024-03-06T00:26:50","modified_gmt":"2024-03-05T23:26:50","slug":"new-series-of-hydraulic-presses-hidrogarne-for-high-production-in-stamping-die-cutting-and-deep-drawing","status":"publish","type":"post","link":"https:\/\/www.hidrogarne.com\/fr\/hidrogarne-fr\/new-series-of-hydraulic-presses-hidrogarne-for-high-production-in-stamping-die-cutting-and-deep-drawing\/","title":{"rendered":"New series of hydraulic presses HIDROGARNE for high production in stamping, die-cutting and deep-drawing"},"content":{"rendered":"

We would like to introduce our new motorized hydraulic presses CF- Series with throat depth to perform works of medium and high production in stamping, die-cutting and deep-drawing<\/strong>.<\/p>\n

The CF-series HIDROGARNE has been designed with three different power ranges<\/strong>, 80t, 100t y 150t,\u00a0 and they feature a wide range of uses including the possibility of incorporating these machines in automatic production lines.<\/p>\n

As other HIDROGARNE hydraulic presses<\/a>, the hydraulic presses CF series work with hydraulic pressure lower than 290 bar<\/strong> to ensure the greater durability of the hydraulic system as a whole.<\/p>\n

CF-series hydraulic presses consist of an electro welded structure<\/strong> made solely of ST-52.3 steel. They are stabilised and machined at the end of the structural welding process, calculated and designed by finite software with level 5 structural resistance. With all this, we always guarantee a perfect parallelism and our high precision and quality standards.<\/p>\n

These hydraulic presses series CF<\/a> are equipped with a mechanized lower and upper CK-42 stainless steel table<\/strong> with four \u201cT\u201d DIN-650 grooves. The main cylinder is single-acting<\/strong> and it has two lateral cylinders of double-acting<\/strong> installed for\u00a0 quick approaching and returning.<\/p>\n

The electric panel features a Siemens NC<\/strong> enabling the user to select the desired type of work in a manual or automatic position, regulate the working pressure and choose the high or low approach speed. In addition, it allows the programming of 99 different working cycles.<\/p>\n

The CF-series hydraulic presses incorporates lateral protections which are meant to open, with level IV photoelectrical sensors<\/strong> situated at the front to ensure safety.<\/p>\n

The HIDROGARNE\u00a0 CF-series\u00a0 is an accurate solution and a solution of quality<\/strong> to perform your medium and high production of stamping, die-cutting and deep-drawing works.<\/p>\n