Hydraulic press, TL-400/6000-E model, especially designed for the straightening of electro welded structures and flame cut sheets

The motorized hydraulic press with sliding frame and moveable headstock HIDROGARNE TL-400/6000-E model is especially designed for the straightening of large volume electro welded structures and flame cut sheets.

As all our T-series hydraulic presses, its structure is stabilised and machined at the end of the structural welding process to ensure perfect parallelism and precision.

Structure and tables

  • Electro welded structure made solely of ST355JR steel.
  • Stabilized and machined at the end of the structural welding process.
  • Calculated and designed by finite software.
  • Longitudinal displacement of the bridge is carried by frequency inverter and cogged belt
  • Lateral movement of the head is motorized.

Cylinder and hydraulic unit

  • cylinder is double acting with a lapping liner, chrome plunger and maintenance-free anti wear guides.
  • It’s fitted with a removable and interchangeable hold-down plate to avoid the deterioration of the plunger and machined at the end to adapt tools.
  • Anti-turning of the cylinder and a squared front with stroke endings come as standard which enable us to conveniently regulate the cylinder stroke.
  • The motorised two-speed hydraulic unit has automatic rapid speed disconnection.
  • It includes a cylinder decompression valve.
  • Pressure regulator.
  • It works with hydraulic pressure lower than 320 bar.

Electric installation and safety

  • Control panel features a switch enabling the user to select the desired type of work in a manual or semi-automatic position.
  • Switch to select either the fast approach speed or slow operational speed.
  • Operation is carried out by means of a pendant control station with an emergency stop and low-voltage operation.
  • It includes an operation confirmation button.
  • Safety is guaranteed by the use of a line-operated safety installed on the perimeter.
  • It is supplied with a glycerin gauge with reading in tones, hydraulic oil and an instructions manual.
  • It meets and satisfies all the essential health and safety requirements in accordance with the EC standard

Technical features

  • Force: 400 TN
  • Motor power: 11 KW
  • Piston stroke: 450 mm
  • Maximum pressure: 319 bar
  • Approach speed: 10 mm/s
  • Work speed: 3 mm/s
  • Return speed: 18 mm/s
  • Frontal light: 2.560 mm
  • Table measures: 6000×2500 mm
  • Maximum vertical light: 700 mm
  • Headstock displacement: 1.900 mm
  • Frame displacement: 4.900 mm
  • Working height: 800 mm
  • Total length: 6.000 mm
  • Total width: 3.650 mm
  • Total height: 3.250 mm
  • Weight approx.: 28.500 Kg

More special hydraulic presses