Special HIDROGARNE hydraulic press with double stanchions for shipyardsFLV-300 E This FLV-300 E HIDROGARNE hydraulic press is customized for varied works in shipyards As all our F series hydraulic presses, consist of an electro welded structure made solely of S355JR steel. Structure and tables Column structure built in S355JR, bolted and with double pin per column. Cylinder and hydraulic unit The cylinder is simple acting with a lapping liner, chrome plunger with a removable hold-down of 50mm, with an intern drill of M-20 and anti-wear guides. It incorporates an anti-turning of the cylinder with antifriction caps and stroke endings for the regulation of the trail. Two-speed motorized hydraulic unit with automatic high speed deactivation. Silent hydraulic DENSION-PARKER pump. Frontal pressure regulator with a glycerine gauge. REXROTH decompression valve of the cylinder. Gauge reading in tons. Stroke endings for the regulation of the main cylinder stroke. Maximum up and maximum down. Actuation by the electric double pedal at low voltage. Electric installation and safety The control Panel incorporates a selector of approaching speed and working and a manual or semi-automatic cycle selector. SCHNEIDER security module. Emergency stop “Z”. Electrical panel with IP-55 It meets and satisfies all the essential health and safety requirements in accordance with the EC standard. Technical features Power 300 TN Hydraulic unit motor power 10 CV Piston stroke 300 mm Maximum pressure 320 bar Approach speed 11 mm/s Working speed 2,1 mm/s Return speed 16 mm/s Head displacement 1.900 mm Frontal light 3.000 mm Vertical light 1.000 mm Lateral light 330 mm Bed light 530 mm Working height 900 mm Total lenght 3.250 mm Total width 1.000 mm Total height 3.025 mm Aprox. weight 9.500 Kg. More information Standard F series HIDROGARNE hydraulic presses – description Standard F series HIDROGARNE hydraulic presses – catalogue More special hydraulic presses