Hydraulic press, FDV-330 E model, especially efficient in forming and die-cutting works

The HIDROGARNE FDV-330 E model hydraulic press is especially efficient in forming and die-cutting works.

As all our F series hydraulic press, they are stabilised and machined at the end of the structural welding process to ensure perfect parallelism and precision.

Structure and tables

  • Electro-welded structure exclusively manufactured in S355JR steel.
  • It is mechanized at the end of the welding process.
  • Calculated and designed with finite elements software and with 4 level structural coefficient. Whit this, we always guarantee our high standards of precision and quality.
  • It has fixed bed structure with open sides.
  • Mechanized top table of 3.100 x 1400 x 145 mm with 4 lateral guides Ø 80 and 6 “T” grooves.
  • Mechanized lower table of 3.100 x 1400 x 120 mm with 6 “T” grooves.

Cylinder and hydraulic unit

  • Three single-acting cylinders of 110 Tons each one, with pre-filling valve, lapping liner, chrome plunger and maintenance-free anti wear guides.
  • Two lateral double-acting guides for fast approach and quick return.
  • Hydraulic group located in the upper rear.
    • Incorporates a piston pump with constant power.
    • It has automatic disconnection of fast speed, decompression valve of the cylinder and manometer in tons.
    • It incorporates a circuit of independent cooling with oil air converter.

Electric installation and safety

  • The control panel incorporates a Siemens NC with Siemens KP-400 screen and a PLC Siemens S-7/1200.
    • With decimal readout, and digital positioning that allows programming the desired type of work in manual or automatic position,
    • to regulate the working pressure,
    • time of pressing and changes of speeds.
    • It allows the programming of 99 folders with different cycles of work. The PLC has been programmed to synchronize the press with a robotic arm.
  • Operation is carried out by means of a bimanual module.
  • It meets and satisfies all the essential health and safety requirements in accordance with the CE standard.

Technical features

  • Power: 330 Tn
  • Number of cylindres: 3
  • Vertical lights between tables: 730 mm
  • Pistons stroke: 450 mm
  • Table dimensions: 3.100 x 1.400 mm
  • Between columns: 3.170 x 1.300 mm
  • Guides diameter: 80 mm
  • Approaching speed: 75 mm/s
  • Working speed: 5,75 mm/s
  • Return speed: 75 mm/s
  • Working height: 900 mm
  • Hydraulic group
    • Motor power: 22 Kw
    • Maximum pressure: 290 bar
  • Total front: 4220 mm
  • Total lateral : 2105 mm
  • Total height: 3225 mm
  • Weight: 23.500 Kg

More special hydraulic presses