Special rigid arch by segments hydraulic press for elastic-define works RV-2000E

The HIDROGARNE RV-2000E model hydraulic press, with a rigid arch by segments, is especially efficient in elastic-define works with pieces of medium complexity

As all our R series hydraulic press, they are stabilised and machined at the end of the structural welding process to ensure perfect parallelism and precision.

Structure and tables

  • This press is manufactured with a special structure of rigid arch by segments, calculated and designed by finite software with level 5 structural resistance.
  • With all of this, we can guarantee our high precision and quality standards.
  • Provided with a bottom circular table of 550 mm diameter and 8 cylindrical guides.
  • The press has a removable plate by hydraulic acting, for the works of feeding and removable of the pieces.

Cylinder and hydraulic unit

  • The main cylinder of simple effect by upstroke acting, equipped with a pre-filling valve and 4 auxiliary cylinders for the advance and quick return of the table.
  • The hydraulic unit of 15Kw with variable flow pump and constant power, allows make a complete cycle every 2 minutes.

Electric installation and safety

  • The electric panel incorporates a SIEMENS PLC with PROFINET configuration. Programming by means a KT-700 display.
  • Electrical and hydraulic manoeuvres are redundant and self-controlled.
  • They incorporate and additional safety block and self-control devices for manoeuvre and safety.
  • It includes the verification and certification of the correct operation and the safety distance for the photocells.
  • Operation is carried out by low voltage electric pedals.
  • Safety is guaranteed by the use of level IV photoelectrical sensors located at the front and back side of the press.
  • The press meets and satisfies all the essential health and safety requirements in accordance with the CE rules.

Technical features

  • Power: 2.000 TN
  • Piston stroke: 220 mm
  • Vertical light: 120 mm
  • Table dimensions: Ø 550 mm
  • Working height: 2050 mm
  • Approaching speed: 19 mm/s
  • Working speed: 0.65 mm/s
  • Return speed: 28 mm/s
  • Time of the pressure time: 2 min
  • Motor power: 15 KW
  • Total width: 2300 mm
  • Total length: 1300 mm
  • Total height: 3320 mm
  • Weight: 50.000 Kg

More special hydraulic presses