Special 4-cylindrical-column motorized hydraulic press to perform work involving deep-drawingMV-250 E The HIDROGARNE MV-250E model hydraulic press is designed with four cylindrical columns for increased accuracy and capacity, specifically recommended to perform work involving deep-drawing As all our M series hydraulic press, this press is equipped with a mechanized lower and upper C45E stainless steel table with two DIN-650 grooves. Structure and tables This customized hydraulic press consists of three electro welded sections made solely of S355JR steel. It’s stabilised and machined at the end of the structural welding process to ensure perfect parallelism and precision. Calculated and designed by finite software. With all this, we always guarantee our high precision and quality standards. It’s equipped with a mechanized lower and upper C45E stainless steel table with two DIN-650 grooves. We ensure a minimal friction in the vertical displacement of the upper table by installing alloy bronze bushings with graphite filler and a perfect parallelism by four cylindrical columns chromed, rectified and made of C45E steel. The upper table ensures perfect alignment by means of four cylindrical lateral rails with anti-friction bimetallic caps which require no maintenance. The lower table accommodates a hydraulic cushion of 50 tons with a useful area of 950 mm x 750 mm and three frontal arms to support the matrix on the outside of the press. It has a NC SIEMENS KP-400 to control adjustments to the position of the upper table, changes of the speeds and cushion It has a PLC SIEMENS S-7 that allows to program 99 memories. Cylinder and hydraulic unit The cylinder is single acting with a lapping liner, chrome plunger and maintenance-free anti wear guides. The hydraulic group is located entirely on top of the hydraulic press. The hydraulic group includes Denison silent hydraulic pump and air-oil cooler. It includes: decompression system, pressure solenoid valves, pre-filled valves, switching valves, check valves, pressure relief valves and anti-drop valves. Electric installation and safety The control panel features a switch enabling the user to select the desired type of work in a manual position to do adjustments and automatic for production. Operation is carried out by low voltage electric pedals. Safety is guaranteed by the use of level IV photoelectrical sensors situated at the front of the equipment, two fixed lateral protections panels and one practicable protection panel with a magnetic detector disconnection switch situated at the rear. Technical features Power 250 TN Motor power 20 HP Pressure maximum 260 bar Maximum vertical light 1.000 mm Minimum vertical light 500 mm Cylinder stroke 500 mm Distance between columns 2.500 x 700 mm Working table size 2.500 x 1.150 mm Column diameter 150 mm Approaching speed 80 mm/sec. Working speed 7 mm/sec. Return speed 105 mm/sec. Distribution of area hydraulic cushion 950 x 750 mm Working height 1.100 mm Total height approx 3.650 mm Approx. height 15.000 Kg. More information Standard M series HIDROGARNE hydraulic presses – description Standard M series HIDROGARNE hydraulic presses – catalogue More special hydraulic presses