The FDV-330 E fixed bench double column hydraulic press is part of the F series, designed for enhanced precision and capacity, especially for forming and punching tasks.
It utilizes an optimized hydraulic system with a pressure of 290 Bar, ensuring long-term durability and reliability in performance.
It meets and satisfies all essential safety and health requirements according to CE regulations.
STRUCTURE AND TABLES
- It features an electrowelded structure made exclusively from steel S355JR.
- Stabilized and machined at the end of the welding process to ensure perfect parallelism and precision.
- Calculated and designed with finite element software.
- Fixed bed structure with open side panels.
- Upper table machined to 3,100 x 1,400 x 145 mm with 4 lateral guides Ø 80 and 6 T-slots.
- Lower table removable, 3,100 x 1,400 x 120 mm with 6 T-slots.
CYLINDER AND HYDRAULIC GROUP
- Three single-acting cylinders of 110 tons each, with pre-filling valve, lapped sleeve, chrome-plated piston, and maintenance-free anti-wear guides.
- Two lateral double-acting cylinders for approach and rapid return.
- Hydraulic group located at the upper rear.
- Includes constant power piston pump.
- Features automatic disconnection of rapid speed, cylinder decompression valve, and pressure gauge in tons.
- Includes an independent cooling circuit with air-oil converter.
ELECTRICAL INSTALLATION AND SAFETY
- Incorporates a SIEMENS safety PLC model SIMATIC S7 1200 and a 4” touch screen model KTP-400.
- With decimal reading and digital positioning, allowing programming of the type of work to be performed in manual or automatic mode.
- Regulates working pressure, pressing time, and speed changes.
- Allows programming of 99 folders with different work cycles.
- The PLC has been programmed to synchronize the press with a robotic arm.
- Operation is carried out via a two-hand control module.
TECHNICAL SPECIFICATIONS
| MODEL | FDV-330E/NC | |
| Power | tn | 330 |
| Engine Power | kW | 22 |
| Cylinders | units | 3 |
| Piston Stroke | mm | 450 |
| Approach Speed | mm/s | 75 |
| Working Speed | mm/s | 5.75 |
| Return Speed | mm/s | 75 |
| Guide Diameter | mm | 80 |
| Maximum Pressure | Bar | 290 |
| Useful Table | mm | 3.100 x 1.400 |
| Between Columns | mm | 3.170 x 1.300 |
| Vertical Clearance | mm | 730 |
| Working Height | mm | 900 |
| Total Front | mm | 4.220 |
| Total Side | mm | 2.105 |
| Total Height | mm | 3.225 |
| Weight | kg | 23.500 |
