Special HIDROGARNE hydraulic press for cold forming

Special RM-1000 E HIDROGARNE  hydraulic press is adapted and customized for cold forming.

The latest generation R series hydraulic presses now feature a wide range of uses including the possibility of incorporating these machines in automatic production lines.

Structure and tables

  • Rigid structure with closed sides machined and stabilized after welding and constructed with ST-52/3 steel.
  • Upper CK-45 stainless steel table of 1.450 x 900 mm with two “T” grooves.
  • Robust fixed bed created to withstand extreme loads well above its nominal.
  • Lower CK-45 stainless steel table of 1.450 x 960 mm with two “T” grooves.
  • Stroke endings placed at the right side, it allows to regulate the top and bottom stroke and change the speed.

Cylinder and hydraulic unit

  • Two cylinders of 500 tonnes each one and 4 cylindersy to fast forward.
  • Hydraulic group with one speed, it has installed prefilling valves to do a faster approach of the upper table.
    • Main Motor 38 Kw
    • Hydraulic Pump DENISON-PARKER.
    • Approaching speed 60 mm/s
    • Working speed 4mm/s
    • Return speed 90 mm/s
    • Cooling system with radiator air-oil
    • Electro-valves and manoeuvre BOSCH REXROTH .
    • Fast system using pre-filling valves BOSCH REXROTH.
    • Front pressure regulation.

Electric installation and safety

  • Level IV photoelectrical sensors of 800mm
  • Operated by two hand control with level IV security module
  • Electrical control panel with a selector for manual or automatic operation and 1 or 2 cylinder speed selector
  • Gauge in tones
  • Front pressure regulation.
  • Security module.
  • Emergency stop “Z”.
  • Back protections with security doors and micro.
  • Sick front light guards
  • It meets and satisfies all the essential health and safety requirements in accordance with the EC standard.

Technical features

  • Power 1000 Tn.
  • Motor power 38KW
  • Approach speed 60 mm/s
  • Working speed 4mm/s
  • Return speed 90 mm/s
  • Upper table 1.450 x 900 mm
  • Lower table 1.450 x 960 mm

More special hydraulic presses