Special motorized hydraulic press with a solid-arch monoblock for stamping works

The RM-80 E HIDROGARNE motorized hydraulic press is specifically designed and customized to perform work involving stamping

As all our R series hydraulic presses, this is equipped with a mechanized upper CK-42 stainless steel table to ensure perfect parallelism and precision.

Structure and tables

  • Sturdy construction with closed sides.
  • Upper table with four guides Ø 50 mm with bimetallic antifriction sockets of maintenance free.
  • Upper and lower tables with machined ” T” slots of M16 x 18
  • Hydraulic cushion placed at the lower table with 12 candles Ø 30
  • Hydraulic ejector of 2 tons and a stroke of 25 mm placed at the upper table

Cylinder and hydraulic unit

  • Main Cylinder of single acting with 80 tons includes pre -filled valve.
  • 2 side cylinders for approach and quick return.
  • Hydraulic unit located on the top rear.
    • DENISON-PARKER pump.
    • HITOS pressure and manoeuvre electro valves 
    • Gauges tonnes.
    • Front pressure regulator
    • Pressure regulator for the cushion.
    • Air-oil cooler.

Electric installation and safety

  • Electric panel located on the right side.
  • Limit switches located on the Left Side
  • Three adjustable strokes ending for the upper table, two to adjust the table stroke and one to change the speed.
  • Two stroke endings for the cushion, 2 limit switches in the pad, to forward and reverse.
  • Pressure switch for end of cycle.
  • Selector 1 or 2 speeds.
  • Selector for manual or automatic cycle.
  • Selector for the annulment of the hydraulic cushion.
  • Selector for the annulment of the hydraulic ejector.
  • Security module for bimanual and emergency stop.
  • Reset button.
  • Emergency stop type “Z” with latching
  • Back protections with security opening
  • It meets and satisfies all the essential health and safety requirements in accordance with the EC standard.

Technical features

  • Power Tn. 80
  • Maximum light between tables mm. 400
  • Cylinder stroke mm. 250
  • Lower table mm. 700 x 500
  • Upper table mm. 600 X 450
  • Frontal light mm. 800
  • Main cylinder
    • Approach speed mm./seg. 120
    • Working speed mm./seg. 12
    • Return speed mm./seg. 150
    • Working pressure Bar 256
  • Cushion
    • Power Tn. 20
    • Candles diameter / Quantity of candles . Ø 30mm / 6
    • Ejector stroke mm. 250
    • Maximum pressure of cushion Bar 160
  • Hydraulic unit
    • Decompression by timed valve
    • Safety block anti-fall.
    • Suction filter and return.
    • Oil level with thermometer.
    • Denison silent pump
  • Motor power HP. 20
  • Total oil capacity L. 150
  • Dimensions
    • Working height mm. 900
    • Total height approximately mm. 2.650
  • Weight Kg. 3.500

More special hydraulic presses